-
Previous Post
Colored glass
Argon gas injection of double-walled glass is an operation that takes place during the production of these types of glass. You might imagine that only two layers of glass, glue, etc. are used to make double-glazed glass. But you need to know that the insulation operation is done in the empty space between the glass panes in addition to the glass frame. This part of the operation is done by injecting argon gas. In fact, argon gas plays an essential role in making different types of double-glazed glass.
Argon gas injection of double-walled glass includes different steps. In the first step, the double-glazed glass should be attached to the spacer using glue. Then the injection operation is done through the double-walled glass valve. If you pay attention, there are two valves on the double-glazed glass, through one of them, argon gas enters the glass, and the air in the space between the glasses will exit through the next valve.
Argon gas injection
Of course, you should be careful that the percentage of argon gas injection in double-glazed glass is different in different geographical areas. For example, in temperate and northern provinces, about 15% of gas is injected into the glass. Meanwhile, in hot provinces, only about 8% of argon gas is used in injection operations. The reason for this problem can be found in physics. In fact, in hot provinces, due to excessive heat, gas pressure also increases. So if more than a certain amount of argon gas is injected into the glass, then it will escape through the valves for some time. The operation of argon gas injection of double-glazed glass is performed using an automatic device without manual intervention. The setting of the percentage of gas injection into the glass is set in the device and then the injection operation begins.
In the operation of argon gas injection of double-walled glass, gas testing is very important. In fact, during this operation, it is determined that argon gas has been correctly injected into the glass. Different methods can be used for this test. For example, having a cool outer surface and an inner surface at the same temperature as the environment is one of the characteristics of a good double-glazed glass. You can also use a spacer to cover the glass completely uniformly to ensure this operation.
Making double-glazed glass
If during the argon gas injection test of the double-paned glass, you notice a defect in the injection, you must completely discharge the gas from the glass and start the injection operation again. The uniform distribution of argon gas throughout the glass will increase the quality of double-glazed windows.
The argon gas injection of double-glazed glass is performed at Sepenta Glass Company with excellent quality. This company is known as one of the most famous centers for the production of double-glazed glass. In this collection, injection operations, testing, glass making, etc. are performed by experts using the most advanced injection devices. Therefore, the quality of production of double-glazed glass in this collection is very high.
Buying double-glazed glass from a reliable and high-quality collection is of particular importance. Since it is usually relatively expensive to buy double-glazed glass, it is better to buy the desired product from a reliable collection. In this case, you will have peace of mind about after-sales service and product quality assurance. The Sepenta Glass collection makes every effort to provide you with double-glazed glass at a reasonable price while maintaining the quality. Therefore, by purchasing from this collection, you will have access to a quality product at an affordable price.
Argon injection into double-glazed glass
Argon gas injection of double-glazed glass is one of the glass insulation steps. This operation is done through the valves on the glass. During this work, the air between the two layers of glass is discharged and argon gas takes its place. To ensure the correct injection of argon gas into the glass, we use methods to test the glass. In case of failure in the injection, the operation must be started again. The percentage of argon gas injection into the glass is determined according to the climate of different regions. For hot regions, about 8 percent and for temperate regions about 15 percent of gas will be injected into the glass. It is better to go to a reputable collection to buy quality double-glazed glass. It is hoped that the provided information has provided you with the background of argon gas injection of double-glazed glass.
Information about the latest festivals and special discounts on the website
Sepenta glass company (former Arash Kamal Novin) has started its activity in the field of design, production and implementation of modern facade since 2002. In 2014, this company has established a construction glass factory with the use of expert manpower, modern and up-to-date machines, and relying on many years of experience in the field of facades, with the aim of meeting the needs of the domestic and international markets.
Yousef Abad - Bistun St. - between 16th and 18th alleys - No. 47 - 4th floor, unit 14
02145622 (Ext. 110) (Mehrsa Fani, Sales expert)
No. 125, South Khayam St., Tehran
No products in the cart.
ارتباط با ما