General principles of glass implementation

The basic distance for the seam between the glass and the frame is 2 to 3 mm. Make sure that the lining color must be dry before placing the glass. In addition, the location of the glass must be completely cleaned and free of dust and grease. The exact size of the glasses is calculated according to the dimensions of the molds in which the glass is placed.

Working and installing glass

Glass cutting is done using tools with a diamond blade. Also, plastic or rubber liners or strips are used to install glass according to the type of door and window. which we will discuss further.
For wooden and metal frames that have slats, the slats must be removable and re-installable. The distance of automatic screws used for these zawars is about 20 cm.
For doors and windows that use plastic tape to install their glass. They should be careful when cutting the glass to the space required for these rubber bands.
For wooden or metal frames that are not used at the same time as installing glass. Care should be taken to use a sufficient amount of lining. In the case of this type of glass, the lining is done in the form of a triangle with legs of one centimeter on the edges.
If one-sided patterned glass is used. The patterned surface of the glass is placed outside the environment. In order to have a better view and to prevent permanent contamination of the glass.

Unbreakable or tempered glass

For safety glass or tempered glass, tools such as stoppers, waist clamps, and wall clamps should be used. Fasteners for connecting to the roof glass and all kinds of hinges for this type of glass and other installation tips should be used according to the building plans. If the dimensions of the glass are large, vibration dampers should be used in the required parts of the glass. Also, larger than usual inscriptions should be profiled. This is especially necessary for installing inscriptions on false ceilings. Standard fittings must be used. which are resistant to pressure and rust and are made of resistant metals and alloys.

Drilling and stoning construction glass

Drilling and stoning construction glass As we said, tools with a diamond blade are used to cut construction glass. They also use diamond drills to drill glass. Leveling or grinding of glass is generally done on the edge of the glass. So that the sharpness of the edge of the glass is gone and does not cause cuts or discomfort to the consumers. This work is done by means of diamond sanding stone devices in factories and workshops.

Glass cleaning

When cleaning the glass, be careful not to damage the glass surface, the glass lining and the window frame. All parts of the glass, including the corners of the door and window frames, the corners and edges of the glass, etc., must be cleaned. If you spill paint on the glass while painting, it is better to use thinner. Strictly avoid using chemicals not approved by the monitoring device.
The glass Sepenta Glass factory handles all stages of design, production and installation of building glass, including tempered glass. It does double-glazed glass and laminated glass with the most up-to-date devices and experienced professionals.